| Feature | Jumper Setting | CPU Jumper | Connector |


1. FEATURES
CPUIntel P54C
Speed 75/90/100/120/133 MHz CPU
25/30/33 MHz PCI bus
I/O clock 8MHz for ISA bus
DRAM Memory 72-pin 1/24/8/16/32 Mb SIMM
2 ~ 128Mb on board
Supports fast page
Cache Memory SRAM 256 Kb~1 Mb, write back
BUS Slots 5 16-bit ISA & 3 PCI bus
PCI Enhanced IDE on Board Supports 4 IDE Hard Drives
Supports Mode 3 for High Performance HDs
Supports LBA Mode
Dimension 22 Cm x 25.5 Cm
BIOS Award Legal
Operating System MS/DOS, OS/2, Windows 3.x, Windows 95, Windows NT, Novell, UNIX, SCO UNIX

2. JUMPER SETTING
JP3CMOS Function Select
OpenTo maintain setup data (Default)
ClosedTo clear setup memory
JP16Suspend Switch
JP17Flash ROM Type Voltage Select
1-2 Closed+5 V
2-3 Closed+12 V
All OpenEPROM used
JP18HDD LED
JP20CPU VOLTAGE SELECT (V.3 or later)
1-2 Closed3.5 V (VRE)
2-3 Closed3.45 V (VR/STD)

Cache Size Select
Jumper256 Kb512 Kb 1 Mb
JP11OpenClosed Closed
JP12OpenOpen Closed

3. CPU JUMPER SETTING
CPU SpeedJP9 (1-2)JP9 (3-4) JP9 (5-6)JP14JP13
75 MHzCLOSEDOPEN OPENOPENOPEN
90OPENCLOSED OPENOPENOPEN
100CLOSEDOPEN CLOSEDOPENOPEN
120OPENCLOSED OPENCLOSEDOPEN
133CLOSED OPEN CLOSEDCLOSEDOPEN
*V.12 or later has JP13.

4. CONNECTOR
J15
Pin NoAssignment Pin NoAssignment
1Speaker10 Turbo LED-
2NC11 Turbo LED+
3Ground12 Reset Control
4+5 Vdc13 Ground
5Power LED+14 NC
6NC15 NC
7Ground16 NC
8Key Lock17 +5 Vdc
9Ground18 Ground

Pin NoJP20
Fan Connector
1Ground
2Ground
3+12 V
4+12 V
5Ground
6Ground


This page has been accessed 183 times since June 7, 1996.
This page is last updated June 28, 1996.
Copyright © 1996 Pantex Computer Inc. All rights reserved.